Free Essays on The Hurricane

The reason for this paper is to dismember the film, â€Å"The Hurricane†, and endeavor to dissect it through the extent of wrongdoing or potentially exploitation, keeping in mind the desire of applying different standards, speculations, and ideal models related with wrongdoing or potentially exploitation. In the first place, I should give a short abstract of the over two hour film as to give a thought of the time period that this film involves on the grounds that authentic and true to life setting are significant in the event that we need to take a gander at the film in this specific light. The Hurricane is a sincerely charged show, which investigates the life and unfair detainment of boxing legend Rubin â€Å"Hurricane† Carter. The film begins by reviewing Carters’ annihilation of welter-weight boss of the world Emile Griffith, while the story at the same time flashes to Carters’ imprisonment. The following scene is of the wrongdoing in 1966 that Carter is improperly indicted for submitting where three individuals are executed in a neighborhood bar. Therefore, Rubin Carter and John Artis are both attempted and sentenced for three checks of homicide. The film at that point shows Carter composing his diaries, which lead to arrival of his book â€Å"The Sixteenth Round†. After seven years a young person (Lersa Martin) from Brooklyn, New York and three Canadian liberal activists (Terry, Sam, and Lisa) who read Carters’ story are persuaded of Carters guiltlessness and are resolved to help set Carter free. In the long run, in 1985 Rubin â⠂¬Å"Hurricane Carter is absolved of the charges and set free. In the regular terms we would ordinarily say that Rubin Carter was only the survivor of a slanted equity framework yet we should take a gander at this with better eyes and concentrate progressively intensive implications of wrongdoing as well as exploitation. To begin with, lets investigate this movies setting. The killings and Carters conviction and detainment occurred in the violent occasions of the late sixties when blacks were battling for their social equality. With so much social agitation ... Free Essays on The Hurricane Free Essays on The Hurricane The reason for this paper is to dismember the film, â€Å"The Hurricane†, and endeavor to investigate it through the extent of wrongdoing as well as exploitation, keeping in mind the desire of applying different standards, speculations, and ideal models related with wrongdoing and additionally exploitation. Initially, I should give a short summation of the over two hour film as to give a thought of the time period that this film involves on the grounds that authentic and true to life setting are significant on the off chance that we need to take a gander at the film in this specific light. The Hurricane is a sincerely charged show, which investigates the life and illegitimate imprisonment of boxing legend Rubin â€Å"Hurricane† Carter. The film begins by reviewing Carters’ annihilation of welter-weight boss of the world Emile Griffith, while the story at the same time flashes to Carters’ imprisonment. The following scene is of the wrongdoing in 1966 that Carter is illegitimately indicted for submitting where three individuals are murdered in a nearby bar. Therefore, Rubin Carter and John Artis are both attempted and sentenced for three checks of homicide. The film at that point shows Carter composing his diaries, which lead to arrival of his book â€Å"The Sixteenth Round†. After seven years a young person (Lersa Martin) from Brooklyn, New York and three Canadian liberal activists (Terry, Sam, and Lisa) who read Carters’ story are persuaded of Carters honesty and are resolved to help set Carter free. In the end, in 1985 Rubin â€Å"H urricane Carter is excused of the charges and set free. In the regular terms we would typically say that Rubin Carter was only the survivor of a slanted equity framework yet we should take a gander at this with better eyes and concentrate progressively intensive implications of wrongdoing as well as exploitation. To start with, lets investigate this movies setting. The homicides and Carters conviction and detainment occurred in the violent occasions of the late sixties when blacks were battling for their social liberties. With so much social turmoil ...

I Will Forever Draw free essay sample

Each Christmas that I can recall that, I requested and got a workmanship unit. Provided with pastels, shading pencils, markers, and watercolors, I had the enchantment to release my inward child’s creative mind. I constantly drew Sailor Moon, Pokemon, Digimon, and made my own characters. Climbing through primary school, I for the most part was discovered drawing and exceeded expectations my abilities in drawing that my educators would staggeringly say, â€Å"Did you truly draw this?† or â€Å"Wow, that is astonishing, you’re very talented.† I believed I was a rising craftsman. At the point when I at long last showed up in center school, I found the motivation that would move me for a real existence time. Anime and manga was my most extreme revelation. Anime is Japanese movement and kid's shows that are known for its huge eye style. Manga is Japanese funnies that are perused from option to left. Out of nowhere, I came to understand that I had cherished anime longer then I had ever recognized. We will compose a custom exposition test on I Will Forever Draw or then again any comparative subject explicitly for you Don't WasteYour Time Recruit WRITER Just 13.90/page The characters that I had drawn when I was a kid were anime from the start. I initiated to draw a ton of characters from mangas and I represented my very own significant number novel figures with an anime approach. Moreover, I started to peruse numerous arrangement of manga that moved me to reveal original thoughts. From sci-fi to sentiment and satire, there is a manga for everybody. I can watch anime on Youtube for quite a long time. My preferred animes are Cardcaptor Sakura and Tsubasa Reservoir Chronicles. I like to state, â€Å"Anime is my enemy of drug.† I am dependent. At the point when high school’s inviting entryways opened, I knew toward the finish of the multi year venture, I would need to focus on who or what I needed to be. Prior to entering the limit of secondary school, I didn’t have a suspicion, I knew, what my profession field would be. I unceasingly longed for being a visual artist. At Valley Regional High School, they offered realistic expressions. This elective is craftsmanship and innovation consolidated; they allowed me to develop my energy. I learned structure, shooting, altering, and projects like Adobe Photoshop and Flash. I had what it takes to propel myself in realistic expressions that I never knew existed. I had the ability to breath life into my specialty. It opened another world to me. Nearby with all the bedlam in a computerized universe, I despite everything got back to anime. Anime and manga helped me to support my inventiveness level. Essentially, thoughts that I brought to the table were seeded by an anime , however later I learned not to incline toward anime as a support for motivation. I was equipped for creating unique thoughts all alone. At the point when I glance back at my past, anime gave off an impression of being there and will consistently be. Anime is my everlastingly muse. Anime was there when I was youthful and urged me to draw, anime was there when I required motivation, and anime is all the more then a pastime, however an enthusiasm. I see a fanatical and energized future ahead. The progression of time may have transformed me, yet a few things will consistently remain. I will wind up sometime making common known characters. I will discover my approach to dream an endless fantasy about being an illustrator. I will always draw.

Complete Guide to Write Mind Blowing About Us Page

Complete Guide to Write Mind Blowing About Us Page If I say please tell me about yourself? I am sure you wont able to talk much. But this is an important question while you for any Job interview. But not only for Job interview but also this is required and essential for your Blog, Website and Business Page. Your sites readers always want to know who is behind this site. And want to know more details about you and your site. If you are having a personal Blog then this must be a killer weapon for turning your Blog readers into super fans. But what about Blogs about us page? Yes Blogs about us page is proper blending of about you and your Blog Information. Dont think this is a page about your name, parents information, education information and marital status etc. Because you have to think what readers want to know? Live Demo For writing a killer About Me or About Us page you have to struggle little bit. Because this is the featured page of any Blog, where readers frequently visit. Let your audience know which reader group suitable for your site? This is pretty simple but important that which audience is suitable for your Blog. Though visitors will understand after visiting your site but you should state clearly. Suppose you have made your Blog for teenage people but you are targeting the adult readers. So you are targeting wrong readers group and they wont connect with your Blog. Ifaccidentallyvisit your Blog then they will exit from there instantly andnever come back. How readers will benefit by reading your Website? This thing will come first that what values give your Blog to your readers? Just think and write up in a piece of paper. From my point of view it should be written point basis. Thus readers can get clear idea. Your blog readers want to know why they will read your Blog. What are the benefits to read your Blog? For example- By reading your Blog readers can start their Blogging career or they will able to improve SEO. In addition they may earn money by learning tricks from your Blog. Explain your sites BIO for potential audience After knowing the Blog value and audience readers want to know little bit about your site, that how this is going on? Because sites BIO represent complete scenario about your Blog site. Explain how you have started this Blog and why you are doing Blogging? In addition, you can mention domain registration date; first post date, about traffic flow, Sites monthly earnings etc. Think Why should someone read your blog? And what will they get out of your posts? Are you providing Blogging Tips? Health Tips? Or Gadget Review Let them know through about us page. So they can expect from your site what they want. You can tell on About us page about your post type or mention some popular series that you already shared in your Blog. IF you have written some awesome Guest article in popular Blog then mention them with links. This will bring more credibility toward your website from readers. Which types of posts do you write? Do you have any awesome series that people should know about? Where should they start? Give brief information with personal BIO I think you are going through right track. Finally you are going to explain about your personal Bio. First select a good quality image to display your Photo on About Us page. Use Photoshop or any better photo editing tools to edit picture. But keep natural color. Dont use any blurry image. Now its time to talk about your personal BIO. In this section dont share about you everything just shares which are related with your Blog. For example talk about how your Blog is helping to improve your life style? What biggest changed has brought after starting Blogging career? Why did you start it? Etc. Now, its okay to include some random information, such as about your living room, are or city. Moreover, you can tell your site readers about your hobbies just try to connect with your audience different way. You may have more idea, so dont fill your About Page with only the above information. Add few Good Quality Images This is not mandatory but for spicing up your About Me or About Us page you can add few good quality picture. For example you are writing on laptop or discussing something or your Blog writing room. If you arent able to take picture then you can get in web. Get any copyright free image and add it in your About Me or About Us page. This will attract your audience on About Me or About Us page. Add Call to Action (CTA) at the End of the page Grab the chance to turning readers into loyal. If a readers read your About us page first time then they may feel interest about your site. So why dont you take the chance of it? Just add a email subscription box at the bottom of the About us page and get the readers in your mail list. This is known as Call to action (CTA) trick. Because sometimes readers feel encourage when they see a call to action. Not only set email subscription box you can also add Facebook, twitter Like button and write there Say Hello to me on Facebook or Twitter. But wise decision will be adding single subscription option. If you add all social media site link including email subscription option then they may feel annoying. Go more professional way just ask to your audience to stay up to day with your site. Without call to action button many people forget about the site which was feel interesting. Your readers may read a good article on your site but if they failed to bookmark your page then they will forget about your site. So push the readers to become a Fan or subscribe to your mailing lists. Here the details about creating a mind blowing About Me or About Us page creation technique. But I am damn sure that you have better idea than me. Please share with me. Let me know how you tailored your About Me or About Us page in your Blog?

Periscope Inventors Sir Howard Grubb and Simon Lake

A periscope  is an optical device for conducting observations from a concealed or protected position. Simple periscopes consist of reflecting mirrors and/or prisms at opposite ends of a tube container. The reflecting surfaces are parallel to each other and at a 45 ° angle to the axis of the tube. The Military This basic form of periscope, with the addition of two simple lenses, served for observation purposes in the trenches during  World War I. Military personnel also use periscopes in some  gun turrets. Tanks  use periscopes extensively: They allow military personnel to check out their situation without leaving the safety of the tank. An important development, the  Gundlach rotary periscope, incorporated a rotating top, allowing a tank commander to obtain a 360-degree field of view without moving his seat.  This design, patented by  Rudolf Gundlach  in 1936, first saw use in the  Polish  7-TP  light tank (produced from 1935 to 1939).   Periscopes also  enabled soldiers to see over the tops of trenches, thus avoiding exposure to enemy fire (especially from snipers).  During  World War II, artillery observers and officers used specifically-manufactured periscope binoculars with different mountings. More complex periscopes, using  prisms  and/or advanced fiber optics instead of mirrors, and providing magnification, operate on  submarines  and in various fields of science. The overall design of the classical submarine periscope is very simple: two telescopes pointed into each other. If the two telescopes have different individual magnification, the difference between them causes an overall magnification or reduction.​ Sir Howard Grubb   The Navy attributes the invention of the periscope (1902) to Simon Lake and the perfection of the periscope to Sir Howard Grubb. For all its innovations,  USS Holland  had at least one major flaw; lack of vision when submerged. The submarine had to broach the surface so the crew could look out through windows in the conning tower. Broaching deprived the Holland of one of the submarine’s greatest advantages – stealth. Lack of vision, when submerged, was eventually corrected when Simon Lake used prisms and lenses to develop the omniscope, forerunner of the periscope. Sir Howard Grubb, a designer of astronomical instruments, developed the modern periscope that was first used in Holland-designed British Royal Navy submarines. For more than 50 years, the periscope was the submarine’s only visual aid until underwater television was installed aboard the nuclear-powered submarine  USS Nautilus. Thomas Grubb (1800-1878) founded a telescope-making firm in Dublin. Sir Howard Grubbs father was noted for inventing and constructing machinery for printing. In the early 1830s, he made an observatory for his own use equipped with a 9-inch (23cm) telescope. Thomas Grubbs youngest son Howard (1844-1931) joined the firm in 1865, under his hand the company gained a reputation for the first-class Grubb telescopes. During the First World War, demand was on Grubbs factory to make gunsights and periscopes for the war effort and it was during those years that Grubb perfected the periscopes design.

Bucephalus The Horse of Alexander the Great

Bucephalus was the famous and well-loved horse of Alexander the Great. Plutarch tells the story of how a 12-year old Alexander won the horse: A horse dealer offered the horse to Alexanders father, Philip II of Macedonia, for the enormous sum of 13 talents. Since no one could tame the animal, Philip wasnt interested, but Alexander was and promised to pay for the horse should he fail to tame it. Alexander was allowed to try and then surprised everyone by subduing it. How Alexander Tamed Bucephalus Alexander spoke soothingly and turned the horse so that the horse didnt have to see its shadow, which had seemed to distress the animal. With the horse now calm, Alexander had won the wager. Alexander named his prize horse Bucephalus and so loved the animal that when the horse died, in 326 B.C., Alexander named a city after the horse: Bucephala. Ancient Writers on Bucephalus King Alexander had also a very remarkable horse; it was called Bucephalus, either on account of the fierceness of its aspect, or because it had the figure of a bulls head marked on its shoulder. It is said, that he was struck with its beauty when he was only a boy, and that it was purchased from the stud of Philonicus, the Pharsalian, for thirteen talents. When it was equipped with the royal trappings, it would suffer no one except Alexander to mount it, although at other times it would allow anyone  to do so. A memorable circumstance connected with it in battle is recorded of this horse; it is said that when it was wounded in the attack upon Thebes, it would not allow Alexander to mount any other horse. Many other circumstances, also, of a similar nature, occurred respecting it; so that when it died, the king duly performed its obsequies, and built around its tomb a city, which he named after it  The Natural History of Pliny, Volume 2, by Pliny (the Elder.), John Bostock, Henry Thomas RileyThat on the further side, he namd NicÅ“a, in Memory of his Victory over the Indians; This he namd Bucephalus, to perpetuate the Memory of his Horse Bucephalus, which died there, not because of any Wound he had received, but meerly of old Age, and excess of Heat; for when this happend, he was nigh thirty Years Old: He had also endurd much Fatigue, and undergone many Dangers with his Matter, and would never suffer any, except Alexander himself, to mount him. He was strong, and beautiful in Body, and of a generous Spirit. The Mark by which he was said to have been particularly distinguished, was a Head like an Ox, from whence he receivd his Name of Bucephalus: Or rather, according to others, because he being Black, had a white Mark upon his Forehead, not unlike those which Oxen often bear.  Arrians History of Alexanders Expedition, Volume 2

Estimating The Age Of An Unidentified Person - 1468 Words

Estimating the age at time of death from an unidentified individual’s remains is an important factor of forensic anthropology. There are certain standard processes and procedures that are employed in the lab to help determine the age as well as other biological profile data. In young adults, bone and tooth maturation are often used to roughly estimate the age of the body. In adults, the deterioration of bones is used to predict the age of the unknown body. However, there are factors that can alter the ability to accurately predict the age of an unidentified person. These factors include, but are not limited to, the environment, the culture they are surrounded by and their natural development time. These variations can cause changes in bone degeneration among populations. When such techniques to determine the age first started being used, the sample for the standards were all from North America meaning there was very little variation and accuracy for it to be used for all ethnicities. As time passed, researchers started evaluating specific populations in order to create more area specific standards. With this came the introduction of new methods and techniques that can be used to determine the age, such as the one in this study. This study focuses on the chest plate, specifically the sternal ends of ribs. The sternal ends of ribs are a good indication for age because the standards allow for age of death estimation above fifty years of age whereas most other standards doShow MoreRelatedFriday Mourning By Kathy Reichs1549 Words   |  7 Pagesto determine individual s age, sex, time of death, and physical condition from their skeleton remains. It is extremely crucial that Brennan diagnoses the skeleton remains accurately, as the legal investigation greatly depends on it. Brennan refers to multiple biological anthropology methods while she was assessing these skeletons. She analyzes morphological features such as pelvis for a quick sex assessment and relies on radiocarbon dating to indicate when the person died. To begin with, BrennanRead MoreThree Dimensional Facial Reconstruction ( Gupta Et Al1642 Words   |  7 Pagesthird method identified was â€Å"combination Manchester Method/ British Method† where â€Å"soft tissue and facial muscles† are accounted for through the examination of the skull, and application of the database values for soft tissue depths determined from age, sex and ethnicity of individual (as discussed earlier) (Gupta et al., 2015, 27). There are many more steps required in this method to obtain a reconstruction of a face, taking different characteristics of the given skull, for example, â€Å"the thicknessRead MoreOsteology: Estimating Femur Length from the Diameter of the Femoral Shaft2779 Words   |  12 Pages BIEGN3005 Honours Project March 2010 Student name: Stephen Dempsey Supervisor name: Professor Alan Turner Estimating femur length from the diameter of the femoral shaft Stephen Dempsey BIEGN300 Honours Project Person Number: 343106 Submission Date: 5th March 2010 Abstract Bone lengths can be used to provide stature estimations in case of unidentified skeletal remains, an important tool in forensic and bioarchaelogical cases. Where the bones are broken or fragmented, regressionRead MoreForensic Anthropology Analysis Conducted On The 21 / 11 / 141921 Words   |  8 PagesForensic Anthropology Analysis conducted on the 21/11/14 Introduction: The practical involved examining the unidentified remains found in the back garden of Mr Wills’ house following his suicide. The remains were subject to a skeletal inventory, a brief examination (in order to assess the condition of the bones), sex estimation and stature estimation. All of these examinations were conducted with the objective of producing a biological profile for the victim/s in order to gain a better understandingRead MoreDamodaran Book on Investment Valuation, 2nd Edition398423 Words   |  1594 PagesModels Chapter 7: Riskless Rates and Risk Premiums Chapter 8: Estimating Risk Parameters and Costs of Financing Chapter 9: Measuring Earnings Chapter 10: From Earnings to Cash Flows Chapter 11: Estimating Growth Chapter 12: Closure in Valuation: Estimating Terminal Value Chapter 13: Dividend Discount Models Chapter 14: Free Cashflow to Equity Models Chapter 15: Firm Valuation: Cost of Capital and APV Approaches Chapter 16: Estimating Equity Value Per Share Chapter 17: Fundamental Principles ofRead MoreProject Mgmt296381 Words   |  1186 PagesOutsourcing 12.1.1 Procurement requirements [G.8] 12.1.2.3 Contract types 9.4.2.3 Conflict management 12.2.7 The art of negotiating 12.2.3.5 Change requests Chapter 13 Monitoring Progress Chapter 5 Estimating Times and Costs 6.4 Activity duration estimates (.3) 6.4.2 Estimating tools (.1.3.4) 6.3.1 Identifying resources 7.1 Activity cost estimates (.2.3.4.5) 5.1.2.4 Delphi method Chapter 6 10.5.3 Cost/schedule system (.1) 6.6 .2.1 Time performance 7.2.3.1 Cost baseline developmentRead MoreDental Patient Management System12401 Words   |  50 PagesContact no, and Email. Each party has unique identification number. For example customers must have customer ID and very importantly the Past History of their health status, and the complaint type. These details are helpful for contact a particular person of any information. If anyone changes the location or contact number that should be updated in the database. * Maintain Patient History amp; X-rays The sub system should be maintain patient details taken at the time of registration and it shouldRead MoreTapal Tea Marketing Report12701 Words   |  51 Pagesband building exercises. So in this way they shifted from a well planned gorilla attacks to a frontal attack which Brooke Bond and Lipton were unable to defend because of being engage in fighting for there market share with each other,and under estimating a brand which was few years ago a shop in jodia bazaar.(that clearly demonstrates the real essence of marketing war that is THE unknown†¦meaning who is the enemy, where is the enemy, how to find the enemy, how to beat the enemy before the enemyRead More_x000C_Introduction to Statistics and Data Analysis355457 Words   |  1422 PagesThree Reasons to Study Statistics 1 1.2 The Nature and Role of Variability 4 1.3 Statistics and the Data Analysis Process 7 1.4 Types of Data and Some Simple Graphical Displays 12 Activity 1.1 Head Sizes: Understanding Variability 22 Activity 1.2 Estimating Sizes 23 Activity 1.3 A Meaningful Paragraph 24 1 2 Collecting Data Sensibly 2.2 Sampling 32 27 2.1 Statistical Studies: Observation and Experimentation 27 2.3 Simple Comparative Experiments 42 2.4 More on Experimental Design 51Read MoreProject Managment Case Studies214937 Words   |  860 PagesCompany 229 Mohawk National Bank 231 5 NEGOTIATING FOR RESOURCES 235 Ducor Chemical 237 American Electronics International The Carlson Project 245 241 Contents vii 247 6 PROJECT ESTIMATING Capital Industries 249 Polyproducts Incorporated 251 Small Project Cost Estimating at Percy Company Cory Electric 259 Camden Construction Corporation 263 7 PROJECT PLANNING 267 258 Greyson Corporation 269 Teloxy Engineering (A) 274 Teloxy Engineering (B) 276 Payton Corporation

Optimized Load Planning Of Intermodal Train - Myassignmenthelp.Com

Question: Disuss about the Optimized Load Planning Of Intermodal Train. Answer: Introduction The report is prepared to focus on the management of networks and logistics departments at Qube Holdings Limited. The ways by which it has managed a good infrastructure by enabling various operating divisions to ensure successful management of import and export cargo supply chains in the area of New South Wales, Australia will also be illustrated here. The management of logistics is one of the major components of the supply chain management that has helped in meeting the demands and preferences of the customers and maintained proper control, planning and implementation of the supply chain resources for moving or storing goods and services from the point of origin to the delivery. The report will illustrate the various issues related to the logistics network and management by Qube at New South Wales, Australia. The resolution strategies will also be provided to ensure that the expenditures re reduced and the customers services are improved as well, which are considered as major benefi ts of logistics management. The issues that are faced by the company and the resolution techniques will be created with the utilization of various logistics models and concepts and furthermore will provide useful recommendations for managing successful logistics network all throughout. Logistics network and management One of the major aspects of supply chain management is the logistics management that has helped in meeting the demands and preferences of the customers through proper planning, control and coordination. It has facilitated the processes of making movements and storage of goods and services along with important data and information from the source to the destination point. The logistics management allows for managing the process of accumulating the raw materials and resources until the process of final production and delivery to the clients and other businesses (Allen, Browne and Cherrett 2012). To respond to the needs and preferences of the customers, the management of logistics has managed to facilitate the process strategy and even planned for necessary approaches. This was done for implementing the most suitable strategies and manages the logistics network and departments with ease and effectiveness. Qube Logistics has set up a new operational unit at New South Wales where operations that are managed include Port Botany Empty park, Macarthur Intermodal terminal, Yennora Intermodal terminal and Port Botany Freight Terminal. The New South Wales logistics unit managed by Qube manages freight depots, warehousing activities and store goods in the containers. The rail terminal network is huge and the size of the rail fleet includes 750 wagons and 65 locos. The logistics management and networking activities at Qube Logistics Holding Ltd are managed by operating services through covering of rail and road transportation, management of warehousing activities and distribution of products and services (Beske 2012). All these kinds of services were combined together for developing an integrated solution and meet the demands and expectations of the business clients. Qube Logistics has even expanded its logistics operations and delivered the best quality logistics services by developing the inf rastructure through innovation and wide network management. More strategic logistics hubs are developed at inland places and even at the ports to enhance the abilities of the company and allow rail, road and air transportation facilities too. Qube Logistics Holding has developed and implemented enhanced technologies and applications for providing the customers with the best quality supply chain solutions (Bruns and Knust 2012). Issues with the current logistics network in New South Wales Various important activities are involved with the logistics management at Qube Logistics including selection of the most appropriate vendors who can provide the best quality transportation facilities. Selection of the best route for transportation of the goods and services from one place to another, identification of the most competent methods of delivery and finally usage of various software and IT components for managing the supply chain solutions and logistics activities are also important. Because of so many things involved during the logistics and network management, issues tend to arise when wrong decisions are made. In case the delivery of goods and services is not on time, then the customers may feel dissatisfied while the damage of goods and services during the transportation activities can also lead to negative mindset created among the customers (da Mota Pedrosa, Nslund and Jasmand 2012). With the inappropriate planning of logistics networks, the expenses would increase a nd there even might be issues while implementing the logistics applications and software. There could also be issues related to outsourcing activities and managing delivery of goods and services without availability of enough resources might even bring inaccurate results (Abc.net.au 2014). Due to high traffic congestion on roads, the goods transportation has been affected and there is delay. Due to tool roads, the people who were assigned with the responsibilities of transporting the goods by road had to pay substantial amount of money. By paying the amount of money, an electronic tag was provided to the vehicles while passing through the tool gates. There were few regional issues as well including the large distance between the source and the destination. It is known fact that kangaroos are major hazards on the roads in various parts of the country. While transporting the goods, these animals have got killed, which could even cerate major threats not only for the equipments and vehicles but also threaten the human life by causing accidents at the middle of nowhere (Dekker et al. 2013). The logistics industry is highly competitive and this has created few major issues for Qube Logistics in New South Wales, Australia, both due to internal and external factors. It has deteriorated the system functioning and even issues due to lack of maintenance of laws, rules, regulations, national policies, state transport strategies and through investments in infrastructure. The various activities were even changed through relocation from Port Jackson to Port Botany, which created major issues like the dividing of containers. There were many containers that were transported previously to Port Jackson through rail transportation and after that those were transported to Port Botany by using road transportation (Fawcett, Ellram and Ogden 2013). Due to heavy traffic, the transportation faced major issues like delay of goods and services reaching the concerned location and even degrading the efficiency of multi modal transport access in logistics operations management largely. There wer e conflicts and misunderstandings between the employees and staffs of Qube with the other import or export companies at New South Wales regarding the violation of environmental laws, rules and regulations. The Australian Government even prevented the utilization of the road network for transferring freights, rather it was told to select the rail networks for transportation purposes (Fernie and Sparks 2014). Due to huge volumes of freights and other goods, the container was not effective for storing all those. Thus, the lack of storage in the containers and lack of terminal space were considered as other issues faced in the New South Wales location of Qube Logistics. The containers could reduce the costs of expenses and manage records of the shipments and the entire location was the source of containers, so with the increased demands and expectations of customers and better business outcomes, the storage of containers wand terminal space was not sufficient (Abc.net.au 2014). When the containers consisting the freights and goods are transferred, those are being checked for managing the reduction of costs and keeping track of the records of shipping. From the records, it was seen that there was limitation of space for storing those containers though more than 60 hectare of area was not used until then (Forslund 2012). There were also other issues related to the recycling and privatization of assets to ensure that the freights are transported properly without any delay that might be caused due to the network traffic. At New South Wales, the recycling and privatization of wastes were needed to be done, because of which, there was a plan for setting up an underground route to prevent traffic on roads. It was just after the elections and the ruling Government changed, which created a huge issue for the development of the underground path and resulted in sudden changes in plans too. Due to lack of investments and division between the various parties, much more complexities arose, which further created issues while managing the logistics network (Ghadge, Dani and Kalawsky 2012). Other issues arose when acquisitions were done and this even weakened the logistics services efficiency and transactions in the short term planning. The climatic and weather conditions change from time to time and due to severe climatic conditions, the road network might create chances and risks of accidents during the transportation and delay of air transport facilities too. While transporting the freights to the New South Wales location of Qube through water transport facilities, critical weather conditions could increase the sea level and result in destroying the coastal locations (Hu and Sheu 2013). Resolution techniques To overcome the issues and ensure successful logistics management, it is important for the company to implement the best and most effective logistics management practices and strategies for focusing on the collaboration efforts rather than prioritizing on the competition within the logistics industry. By promoting good communication among the providers if transportation facilities, vendors and purchasers, it could be easy for the Qube Logistics department at New South Wales to reduce the expenditures and at the same time, facilitate the management of networks. This would not only make the business achieve success but could also result in generating more revenue in business and attain competitive advantage as well. It was understood from the above section that the Australian Government enabled the company to use rail networks rather than the road networks for the transfer of freights. Afterwards, the rail authority made an effective business decision and ensured that most of the freig hts, i.e., nearly more than 70 percent of the freights in the containers should be transported through the rail networks from the source location to the Port Botany in New South Wales (Jacobs and Chase 2017). It facilitated the multi modal transport access and even improved the effectiveness of the logistics and network management largely for Qube Logistics, Australia (qube.com.au 2018). Analysis There are various strategies that are implemented to resolve the issues faced within the logistics and supply chain management at Qube Logistics Holding Ltd in Australia. The company must work with other business partners to focus on the making of cooperative decision and at the same time make an effective decision for the success of the business and even align the logistics alliance aligned with the organizational goals and objectives. There were other issues related to the lack of enough storage in the containers for storing the freights and goods (Lai and Wong 2012). The rolling horizon approach could be undertaken for managing the various containers with inbound, outbound and transit containers altogether. This would help in allocating the storage functions properly and at the same time reduce the workload by ensuring that the same plans were not repeated (Zhang et al. 2013). The reverse logistics network and management also helps in managing the products and services that may no t be used or there is no need to be managing those. The reverse logistics mechanism is useful for reusing the materials and recycling the products and services while moving those from the source to the destination at New South Wales. The four major benefits that could be obtained by using the reverse logistics could be the reduction of costs, manage substitute products and services, reuse and recycle the elements properly too (Manuj and Pohlen 2012). Logistics concepts and models The reverse logistics could be used as a quantitative model by dividing those into three major components including the planning for distribution, control and management of inventories and planning for production. The non-linear model could also be developed for considering both the return and forward networks and at the same time resolve the issues of limited capacity by making sufficient numbers of trucks, vehicles, warehouses and machines required for transportation activities and also for the purpose of logistics and network management. The strategy implemented could also help in ensuring that the vehicles, once emptied the freights at the destination, were used again as soon as possible (Myerson 2012). The costs could be used with the use of model through proper management of return trips and making sure that the trucks and vehicles were properly managed. This could enhance the safety level while transporting goods from one place to another. The intermodal transportation could be used for allowing faster delivery of the freights and goods and reduce the chances of risks like damage of property and losing those. The intermodal transportation could also be beneficial for moving the freights from the source to the destination, i.e., New South Wales location conveniently and appropriately. The JIT approach is another effective way of moving the freights and manage successful logistics network within the allocated time frame. There could be situations when shipments and freights must be delivered at the right place at the right time, which could result in the satisfaction of customers. By managing the emergency and regular shipments properly, it would be easy for easing the jobs that might be complex and ensure successful delivery of the products at the right time and place, furthermore should keep the customers satisfied and allow the company to gain more profit in business (Huscroft et al. 2013). While using the JIT or Just In time model, various factors must be considered including the time of delivery, cost and quality. The transshipments could help in managing the system of distribution considering the one to many approach and even when the goods and services were not delivered to the right location and at the right time. The major functions of the transshipments included the breaking down of bulk amounts of freights and transferring those n the form of smaller components while consolidation could be another major function. Consolidation could allow the company to join the smaller shipments of freights altogether and combine those into a larger one and then get that delivered to the concerned location. The empty space in the location would be covered and the space of containers could be enhanced for storing more goods (Huscroft 2016). To gain the best economies of scale, the size of vehicles used for the transportation purposes should be different at different stages during the process of delivery of freights from the source to the destination. Recommendations It is recommended to optimise the entire supply chain management activities in a cooperative way for achieving the long-term relationships and ensure successful management of logistics at Qube. The improvement of rail networks should be done as well for enhancing the freight storage and allow for reduction of risks and high investments done. By enabling global restructuring, the spaces of containers as well as the ports would be enhanced. It is also recommended for the Australian Government to ensure that the reconstruction and expansion of certain areas in logistics network and management should be done for fulfilling the requirements and preferences of the logistics services and ensure proper financing to the public infrastructure (Verma, Verter and Zufferey 2012). According to the Government of Australia, here are various acts, laws, legislations and rules that are needed to be implemented like the Heavy Vehicle National Law and Road Safety Remuneration act. This could not only cr eate positive impacts by lowering down the costs of providing the internal training and developmental programs but would also enhance the safety level, furthermore prevent the regulatory bodies from any sort of overlapping or contradictory orders. It is also recommended to make investments for the improvements of organizational infrastructures and furthermore resolve the political and social issues and at the same time, decrease the costs and taxpaying abilities. This would rather help in investing on the projects that could benefit both the community and enhance the efficiency of the New South Wales location (Winter and Knemeyer 2012). Conclusion The report was developed for focusing on the most important concepts of logistics and network management considering the business organisation Qube Logistic Holding Ltd. The company has managed to store its freights and delivered those to the new location in New South Wales for easy transportation and delivery to the clients with ease and effectiveness. There were certain issues while relocating and moving the freights and goods from one location to another and because of that it was important to enable various logistics management approaches for ensuring successfully delivery and this could result in the satisfaction of the customers. Few issues were damage and loss of goods and services during the transportation, high traffic that could lead to congestion on roads and unstable weather conditions. The company could follow various legislations, laws, rules and regulations to make sure that the Government support should be obtained and the shipments and freights were transported prope rly to the concerned location at Port Botany in New South Wales. References Abc.net.au 2014. Abc.net.au. [online] ABC News. Available at: https://www.abc.net.au/news/2014-06-24/extended-interview-with-maurice-james/5547814 [Accessed 23 Jan. 2018]. Allen, J., Browne, M. and Cherrett, T., 2012. Investigating relationships between road freight transport, facility location, logistics management and urban form.Journal of Transport Geography,24, pp.45-57. Beske, P., 2012. Dynamic capabilities and sustainable supply chain management.International Journal of Physical Distribution Logistics Management,42(4), pp.372-387. Bruns, F. and Knust, S., 2012. Optimized load planning of trains in intermodal transportation.Or Spectrum,34(3), pp.511-533. da Mota Pedrosa, A., Nslund, D. and Jasmand, C., 2012. Logistics case study based research: towards higher quality.International Journal of Physical Distribution Logistics Management,42(3), pp.275-295. Dekker, R., Fleischmann, M., Inderfurth, K. and van Wassenhove, L.N. eds., 2013.Reverse logistics: quantitative models for closed-loop supply chains. Springer Science Business Media. Fawcett, S.E., Ellram, L.M. and Ogden, J.A., 2013.Supply Chain Management: Pearson New International Edition: From Vision to Implementation. Pearson Higher Ed. Fernie, J. and Sparks, L., 2014.Logistics and retail management: emerging issues and new challenges in the retail supply chain. Kogan page publishers. Forslund, H., 2012. Performance management in supply chains: Logistics service providers' perspective.International Journal of Physical Distribution Logistics Management,42(3), pp.296-311. Ghadge, A., Dani, S. and Kalawsky, R., 2012. Supply chain risk management: present and future scope.The International Journal of Logistics Management,23(3), pp.313-339. Hu, Z.H. and Sheu, J.B., 2013. Post-disaster debris reverse logistics management under psychological cost minimization.Transportation Research Part B: Methodological,55, pp.118-141. Jacobs, F.R. and Chase, R.B., 2017.Operation and supply chain management. Mc GrawHill. Lai, K.H. and Wong, C.W., 2012. Green logistics management and performance: Some empirical evidence from Chinese manufacturing exporters.Omega,40(3), pp.267-282. Manuj, I. and Pohlen, T.L., 2012. A reviewer's guide to the grounded theory methodology in logistics and supply chain management research.International Journal of Physical Distribution Logistics Management,42(8/9), pp.784-803. Myerson, P., 2012.Lean supply chain and logistics management. New York: McGraw-Hill. qube.com.au. (2018). Qube.com.au. Retrieved 21 January 2018, from https://www.qube.com.au/ Huscroft, J., T. Hazen, B., J. Hall, D., B. Skipper, J. and B. Hanna, J., 2013. Reverse logistics: past research, current management issues, and future directions.The International Journal of Logistics Management,24(3), pp.304-327. Schnsleben, P., 2016.Integral logistics management: operations and supply chain management within and across companies. CRC Press. Verma, M., Verter, V. and Zufferey, N., 2012. A bi-objective model for planning and managing rail-truck intermodal transportation of hazardous materials.Transportation research part E: logistics and transportation review,48(1), pp.132-149. Winter, M. and Knemeyer, A.M., 2013. Exploring the integration of sustainability and supply chain management: Current state and opportunities for future inquiry.International Journal of Physical Distribution Logistics Management,43(1), pp.18-38. Zhang, X., Zhang, Z., Zhang, Y., Wei, D. and Deng, Y., 2013. Route selection for emergency logistics management: A bio-inspired algorithm.Safety science,54, pp.87-91.

Abortion Essays (1386 words) - Abortion, , Term Papers

Abortion Abortion During the past quarter century, abortion has joined race and war as one of the most debatable subject of controversy in the United States. It discusses human interaction where ethics, emotions and law come together. Abortion poses a moral, social and medical dilemma that faces many individuals to create a emotional and violent atmosphere. There are many points of view toward abortion but the only two fine distinctions are "pro-choice" and "pro-life". A pro- choicer would feel that the decision to abort a pregnancy is that of the mothers and the state has no right to interfere. A pro-lifer would hold that from the moment of conception, the embryo or fetus is alive. This life imposes on us a moral obligation to preserve it and that abortion is tantamount to murder (Kolner 5). In the United States about 1.6 million pregnancies end in abortion. Women with incomes under eleven thousand are over three times more likely to abort than those with incomes above twenty-five thousand. Unmarried women are four to five times more likely to abort than married and the abortion rate has doubled for 18 and 19 year olds. Recently the U.S. rate dropped 6 percent overall but the rate of abortion among girls younger than 15 jumped 18 percent. The rate among minority teens climbed from 186 per 1,000 to 189 per 1,000. The most popular procedure involved in abortions is the vacuum aspiration which is done during the first trimester (three months or less since the women has become pregnant). A tube is simply inserted through the cervix and the contents of the uterus are vacuumed out. The most commonly used type of second trimester abortion is called dilation and evacuation. Since the fetus has bones, bulk and can move, second trimester is not as simple. When as much of the fetus and placenta are vacuumed out then tweezers are used to remove larger parts. After this, or the beginning of the fifth month abortion is serious and actually induced as childbirth. That is, the mother is given substances which puts her into labor and delivers the fetus as she would a full-term baby. About 40 percent of Americans believe that abortion should remain legal and 40 percent believe it should be banned except when the pregnancy threatens the life of the mother or is the result of rape or incest. Also 15 percent b eveit should be illegal in all cases. Although abortion is regarded as a women's right, it should be banned with exceptions because it's considered murder, has many psychological side effects and there is an alternative. Abortion is a women's own right and choice. In 1973 the Roe v. Wade decision proved this by recognizing abortion as a fundamental constitution right and made it legal in all states. The law now permits abortion at the request of the women without any restrictions in the first trimester and some restrictions in the second trimester to protect the women's health. The National Abortion Right Act League argues that without legal abortion women would be denied their constitutional right of privacy and liberty. The women's right to her own body subordinates those of the fetus and the U.S. Supreme Court in Roe v. Wade argued that the women's "right to privacy" overruled the fetus's right to life. If abortion was illegal it would force poor women to bear and raise children they can't afford to bring up. There would be a number of unsafe abortions in back allies. It would also force women to give up their dreams and stay home to bring up babies. Worst of all, it would condemn victims o apeand incest to carry and nurture the offspring of their rapist.(Kolner 5) Abortion is necessary for women to have control over their own bodies and life. One activist said, "If I hadn't had that abortion my life would have been a disaster. I wouldn't have made it to medical school. I was married at that point to a very ill man and it would have been terrible to have to have my baby. People who need abortions are in some kind of turmoil and it's really a life-saving thing."(Blender 4) To ignore the rights of others is selfish and injustice. Women must have the right to control the functions of their own bodies. Revern George Gardiner pastor of the college Hill United Methodist Church, told the council that the ordnance would have done little good. "Young women need the freedom to make choices for their reproductive life

Definition and Examples of Parsing in English Grammar

Definition and Examples of Parsing in English Grammar Parsing is a grammatical exercise that involves breaking down a text into its component parts of speech with an explanation of the form, function, and syntactic relationship of each part so that the text can be understood. The term parsing comes from the Latin pars for part (of speech). In contemporary linguistics, parsing usually refers to the computer-aided syntactic analysis of language. Computer programs that automatically add parsing tags to a text are called parsers. Key Takeaways: Parsing Parsing is the process of breaking down a sentence into its elements so that the sentence can be understood.Traditional parsing is done by hand, sometimes using sentence diagrams. Parsing is also involved in more complex forms of analysis such as discourse analysis and psycholinguistics. Parse Definition In linguistics, to parse means to break down a sentence into its component parts so that the meaning of the sentence can be understood. Sometimes parsing is done with the help of tools such as sentence diagrams (visual representations of syntactical constructions). When parsing a sentence, the reader takes note of the sentence elements and their parts of speech (whether a word is a noun, verb, adjective, etc.). The reader also notices other elements such as the verb tense (present tense, past tense, future tense, etc.). Once the sentence is broken down, the reader can use their analysis to interpret the meaning of the sentence. Some linguists draw a distinction between full parsing and skeleton parsing. The former refers to the full analysis of a text, including as detailed a description of its elements as possible. The latter refers to a simpler form of analysis used to grasp a sentences basic meaning. Traditional Methods of Parsing Traditionally, parsing is done by taking a sentence and breaking it down into different parts of speech. The words are placed into distinct grammatical categories, and then the grammatical relationships between the words are identified, allowing the reader to interpret the sentence. For example, take the following sentence: The man opened the door. To parse this sentence, we first classify each word by its part of speech: the (article), man (noun), opened (verb), the (article), door (noun). The sentence has only one verb (opened); we can then identify the subject and object of that verb. In this case, since the man is performing the action, the subject is man and the object is door. Because the verb is opened- rather than opens or will open- we know that the sentence is in the past tense, meaning the action described has already occurred. This example is a simple one, but it shows how parsing can be used to illuminate the meaning of a text. Traditional methods of parsing may or may not include sentence diagrams. Such visual aids are sometimes helpful when the sentences being analyzed are especially complex. Discourse Analysis Unlike simple parsing, discourse analysis refers to a broader field of study concerned with the social and psychological aspects of language. Those who perform discourse analysis are interested in, among other topics, genres of language (those with certain set conventions within different fields) and the relationships between language and social behavior, politics, and memory. In this way, discourse analysis goes far beyond the scope of traditional parsing, which is limited to that individual texts. Psycholinguistics Psycholinguistics is a field of study that deals with language and its relationship with psychology and neuroscience. Scientists who work in this field study the ways in which the brain processes language, transforming signs and symbols into meaningful statements. As such, they are primarily interested in the underlying processes that make traditional parsing possible. They are interested, for example, in how different brain structures facilitate language acquisition and comprehension. Computer-Assisted Parsing Computational linguistics is a field of study in which scientists have used a rules-based approach to develop computer models of human languages. This work combines computer science with cognitive science, mathematics, philosophy, and artificial intelligence. With computer-assisted parsing, scientists can use algorithms to perform text analysis. This is especially useful to scientists because, unlike traditional parsing, such tools can be used to quickly analyze large volumes of text, revealing patterns and other information that could not be easily obtained otherwise. In the emerging field of digital humanities, for example, computer-assisted parsing has been used to analyze the works of Shakespeare; in 2016, literary historians concluded from a computer analysis of the play that Christopher Marlowe was the co-author of Shakespeares Henry VI. One of the challenges of computer-assisted parsing is that computer models of language are rule-based, meaning scientists must tell algorithms how to interpret certain structures and patterns. In actual human language, however, such structures and patterns do not always share the same meanings, and linguists must analyze individual examples to determine the principles that govern them. Sources Dowty, David R., et al. Natural Language Parsing: Psychological, Computational and Theoretical Perspectives. Cambridge University Press, 2005.Halley, Ned. The Wordsworth Dictionary of Modern English: Grammar, Syntax and Style for the 21st Century. Wordsworth Editions, 2001.

Scattering of Lamb Waves From Typical Structure Defects in Plates Essay

Scattering of Lamb Waves From Typical Structure Defects in Plates - Essay Example ure defects using piezoelectric transducer (PZT) sensors and 3-D Scanning Laser vibrometry and simulation the results by using Autodyne ANSYS is an important wildly recognized non-destructive evaluation SHM technique to locate, identify and quantify the structural damage and hence we can improve the survivability of mechanical structure. 1- The project work will be carried out first by reviewing the various research works and techniques involved in SHM including project related above mentioned non-destructive evaluation SHM technique with Autodyn ANSYS as simulation tool. The information obtained through literature review will further be used for practical work to study and investigate the various aspects of practical applications. 2- Since the practical work involved the application of 3D laser vibrometer in conjunction with Lamb wave technique to locate, identify and quantify typical structural damage like any crack, corrosion and dent, hence as next step I have to prepare test specimens. The test specimen can be a single aluminium plate having all three structural damages or three separate aluminium plates with different structural damage. For my experiment for the worse case situation, I have to prepare a single aluminium plate of 800 X 200 X 20 mm dimensions with all three defects i.e. crack, corrosion and dents as shown in following figure 1, 2 and 3 below. 3- My next step will be to fabricate the sensing devices to the specimen. Since I am using piezoelectric transducer (PZT) as sensors to Lamb wave through 3-D laser scanning hence I fabricate PZT to target

Nano-Thermal Analysis Essay Example | Topics and Well Written Essays - 1000 words

Nano-Thermal Analysis - Essay Example hydrate & solvent 4) Assay development UV, HPLC, TLC 5) Stability      Ã‚  Ã‚   In Solution Thermal, hydrolysis, pH   Ã‚  Ã‚   In solid state Oxidation, proteolysis metal ion Derived properties    6) Microscopy Particle size and morphology 7) Bulk density Tablet and capsule formation 8) Flow properties Tablet and capsule formation 9) Compression properties Acid / excipient choice 10) Excipient compatibility Preliminary screen by DSC, Conformation by TLC POLYMORPHIC COMPOUNDS There are certain compounds that exist in more then one crystalline forms, this property is called polymorphism. Its evaluation is desirable during pre-formulation studies if the drug constitutes the major portion of the dosage form. Only one form of the polymorphic compound is thermodynamically active at a given temperature and pressure. Techniques for investigation for the stable form of polymorphs are microscopy (hot stage microscopy, X-ray diffraction, IR spectrophotometer, thermal analysis and dilalo metry.(Brittain,2009) THERMAL ANALYSIS It is the branch of science that deals with the properties of material that change with temperature. For the measurement of such properties various methods are used. the techniques all follow the change of specific physical property by the change of temperature or time in the specifically controlled environment, since moisture and temperature are the basic factors effecting the stability of the pharmaceutical compounds thus we take temperature to measure various parameters.(Menczel,2009) Thermal analysis Instrumental technique for describing various properties General method Acronym Property measured Application Differential scanning calorimetry DSC ?T, differential power input Measurement of kinetics Differential thermal analysis DTA ?T chemistry, pharmaceuticals, polymers Thermo- gravimetric Analysis TGA Mass composition, extent of cure, stability Thermo-mechanical Analysis TMA Length or volume Shear and torsion modulus of films, fibers, lami nates adhesives Dynamic mechanical Analysis DMA Viscoelastic properties rheological properties Dielectric Analysis DEA Dielectric properties isothermal crystallization Nano/micro-thermal Analysis n-TA Penetration, ?T Surface properties of solid dosage form THERMAL ANALYSIS OF PHARMACEUTICAL MATERIALS AND POLYMERS Techniques such as DSC, TG can investigate the transformation during polymorphic conversion.TGA is often used to measure residual solvents and moisture and solubility of the active materials in solvents. Polymers represent another large are for the application of thermal analysis, analysis of composite material such as glass or epoxy composites, analysis of raw material of packaging, effects of additives used in packaging material determined.TGA can also be used for fiber content determination of the composite. NANO-THERMAL ANALYSIS it is the local thermal analysis technique that allows obtaining understanding of thermal behavior of the materials combined with high spatial resolution imaging capabilities of the Atomic Force Microscopy with a spatial resolution

Product Quality Essay Example for Free

Product Quality Essay List some important physical properties of the fabric. The properties of textile fabrics are important for the control of quality, as well as for end use determination. There are several physical properties of fabric which affecting the performance and aesthetic of fabric. The first one is fabric count, it influences thickness of the fabric. It is the number of ends or picks per inch for woven fabrics, or the number of wales or courses per inch for knit fabrics. Variation occurs because of the weaving or knitting process and from finishing processes. Usually the higher the fabric count, the better the quality and the higher the cost. The second is fabric unit weight. It is the mass per unit area. It is expressed in one three ways; ounces per square yard, ounces per linear yard, and linear yards per pound. It is significant in determining both end use and quality. Moreover, it is fabric width. It means the distance from one edge to the other. Measurement is made perpendicular to the fabric edge, usually including the selvage area. The width is expressed in inches and is usually an average number of measurements taken at evenly spaced interval along the fabric pieces. Next one is fabric shrinkage. It is the process in which a fabric becomes smaller than its original size, usually through the process of laundry. It is undesirable property to the apparels. So the material has to be either shrink resistant or shrink recoverable, such as anti-shrink finish is to keep the fabric smooth and free from undesirable shrinkage. The last one is fabric thickness. It is the distance between the upper and lower surfaces of the material. It is measure under a specific pressure. Warmth and bulk properties depend on the fabric thickness- to-weight ratio. It can also be used as a performance indication of abrasion resistance or shrinkage tests. Generally speaking, the thicker the fabric is, the more comfortable in wearing. 6. What is the commonly used fabric inspection system? Mainly, two industry methods used are the Ten point and Four point systems. The most commonly used is four-point system. A minimum of 10% inspection of fabrics is required. The four-point system derives its name from the basic grading rules that a maximum of four penalty points can be assessed for any single defect. Normally, we inspect 10% of the rolls we receive and evaluate them based on this system. This way, we can avoid fabric related quality problems before it is put into production The following table shows the point system. Size of Defect| Penalty Points| Length of defects in fabric (either length or width)| Defects up to 3 inches| 1| Defects gt; 3 inches lt; 6 inches| 2| Defects gt; 6 inches lt; 9 inches| 3| Defects gt; 9 inches| 4| Holes and openings(largest dimension)| 1 inch or less| 2| Over 1 inch| 4| After inspection, the inspector will add up the defects points and then use the following formula to determine the rate of points per 100 yards. There are some common fabric faults, such as bow, skew, hole, mispick etc. Fabric checker should know common defects found in fabrics and he must recognize defects on the fabric at the time of fabric inspection. For the acceptance criteria and calculation, 40 points per 100 yards is the acceptable defect rate. The ten point system for piece goods evaluation was approved by the Textile distributors institute and the National Federation of Textile, in 1955. It is designed to identify defects and to assign each defect a value based on severity of defect. The system assigns penalty points to each defect depending on its length and whether it is in the warp (ends) or weft (fill) direction. The following table shows the point system.

White Mans Image :: essays research papers

This program is part of the PBS series American Experience. In this episode, a critical eye is cast on the early efforts by Congress to "civilize" Native Americans. This homogenization process required the removal of Native American children from their homes and placing them in special Indian schools. Forced to stay for years at a time without returning home, children were required to eschew their own language and culture and learn instead the ways of the white man. Archival photographs and clips, newspaper accounts, journals, personal recollections, and commentary by historians relate the particulars of this era in American History and its ultimate demise. ~ Rose of Sharon Winter, All Movie Guide In 1875, Captain Richard Pratt began an ambitious experiment that involved teaching Indians in Florida to read and write English, putting them in uniforms and drilling them like soldiers. "Kill the Indian and save the man," was Pratt's motto. With the blessing of Congress, Pratt expanded his program by establishing the Carlisle School for Indian Students. Native Americans who attended these schools help tell the story of an experiment gone bad and its consequences for a generation of Indians. In 1875, Captain Richard Pratt escorted 72 Indian warriors suspected of murdering white settlers to Fort Marion in St. Augustine, Florida. Once there, Pratt began an ambitious experiment which involved teaching the Indians to read and wri te English, putting them in uniforms and drilling them like soldiers. "Kill the Indian and save the man," was Pratt's motto. News of Pratt's experiment spread. With the blessing of Congress, Pratt expanded his program by establishing the Carlisle School for Indian Students to continue his "civilizing" mission. Although liberal policy for the times, Pratt's school was a form of cultural genocide. The schools continued into the '30s until administrators saw that the promised opportunities for Indian students would not materialize, threat they would not become "imitation white men." Native Americans who attended the schools help tell the story of a humanist experiment gone bad, and its consequences for a generation of Discover the tragic, long-term consequences of attempts to "civilize" Native Americans in the 1870s at the Carlisle School for Indians.

Community Problems

Many neighborhoods face serious community problems because of certain factors and they have a certain effect on the people living In the communities. I live around a community where there are a lot of car street races which happen on a regular basis and It creates major chaos over the weekends. Seems Like It Is not a major Issue, however, these street races cause major trouble to all the neighbors as It creates noise, causes accidents. Creates trouble for all the stores around, for people traveling at night and so on.Every weekend, a specific parking lot in the town of Formidable is filled with Hot Rods, college students, high school students and even adults, not to mention, cops too. This is a huge parking lot outside a mall which has plenty of room for cars and is connected to a highway-route 110. It is the main attraction for guys and girls with hot rods. I heard a lot of stories about this location and about the races taking place there every weekend so I decided to take a look f or myself before I could believe any of this.One night, I made a trip to this famous parking lot! At first, when I got to the parking lot, all I saw was a few random cars parked with some guys standing around them and talking to each other In groups. I parked my car there and stopped to watch what happens. I was extremely curious because I had only heard of these kind of scenes in movies and never thought it would be the reality. A little after 1 1 pm, a group of cars came into the parking lot with extremely loud exhaust pipes and loud music.As they revved up the engines my adrenaline started pumping. I could not believe what my eyes saw. A large number of cars drove n and parked there. There were people of all different age groups coming in from high school students, to college students and even elderly men around the age of forty who wanted to show off their hot rods. Soon after, some drivers including female drives took their cars out into the driveway and started drifting and pe rforming rolling burnouts to get the crowd excited.I stepped out of my car and stood there to watch. These people were enjoying themselves with loud music, alcohol, dancing with girls and screaming and shouting. I was shocked when a few gig school kids approached me to ask me about my car because these kids were 9th graders who had sneaked out of their houses at midnight with their parents cars for these races. After around half an hour, a group of cars revved up their engines and started moving towards route 110 so I decided to follow.Once we got onto route 110 they start driving like crazy people over speeding and cutting lanes and eventually turned onto a street off route 110. This lane was completely isolated and there were barely any cars parked there so they lined up their cars there and made a roadblock t the two ends of the lane and started having drag races which made a lot of sound and obviously called In for cops. This is where the major problems from these races start. O nce the cops come In, chaos occurs.These guys get Into their cars and started racing off from these race sites In all different directions to avoid getting caught. They go onto the main roads and over speed causing accidents not only for themselves but all the noise they create. They get into accidents, get caught and pay fines, cause trouble to other drivers on the road and so on. This is a major community problem as it attracts a lot of students in the community from not only colleges but also high schools.These kids have illegal modifications on their cars which adds to money in the black market. It also encourages many others to Join this racing league which leads to accidents and deaths. There is a lot of illegal betting and gambling, underage drinking, over speeding and many such laws broken which cause serious community problems every weekend and according to me this should be checked and stopped as soon as possible!

Hades The God Of The Underworld And The Dead - 1089 Words

Hades: The god of the Underworld and the dead Introduction: Hades or Polydegmon, which means ‘’ the unseen’’ and ‘’ host of many guests’’ respectively was the Greek god of the underworld and the dead in ancient Greece. Hades’ adopted Roman name was Pluto which literally means wealth and riches because the hidden wealth of the Earth. Hades is a third generation god and the offspring of the Titans Rhea and Cronus. Hades’ did not live on Mount Olympus with the other Olympians but rather in the Underworld to look after the souls of the dead with his wife Persephone. Zeus, the ruler of Olympus and the king of the gods and Poseidon, the god of the sea were Hades’ younger brothers. After their defeat of the Titans, the three brothers drew lots to determine who would reign the three territories of the Earth. Zeus drew the sky, Poseidon drew the sea and that left Hades with the underworld. In a myth, Hades kidnapped Persephone and tricked her into staying in the underworld by e ating a pomegranate. Eating anything in the underworld guaranteed one into staying there for eternity, thus making it my product. Background: In the beginning, Gaea was formed out of Chaos, a deep pit in the underworld. She later made Uranus, the god of the sky and mated with him to make the Cyclopes, Giants and finally, the titans. The youngest of the titans, Cronus overthrew his father Uranus and started a family with his sister Rhea. Together, they had Hestia the goddess of the hearth, Demeter the goddessShow MoreRelatedEssay about Hades1389 Words   |  6 Pagesthe underworld as a place for all the dead and clearly visualized it in their myths and legends. The underworld in Greek mythology was not a lively place, for it was where all the dead souls went. When a person died, the soul would be sent to Hades, a more formal name for the underworld. quot;The dead would go to Hades because there was no annihilation in the Greek mythology. The dead are dead because they have a flavorless and unhappy existencequot;. The primary ruling god of the underworld isRead MoreHades and the Odyssey1451 Words   |  6 PagesHades, also known as Aides and Aidoneus, was the son of Kronos and Rhea, and the youngest brother of Zeus and Poseidon. He was the ruler of the mythological subterranean region called the underworld, which was inhabited by the â€Å"shades† or spirits of the dead. It was also home to dethroned or exiled deities who had been overthrown by Zeus and his allies. Hades and his brothers, Zeus and Poseidon, dethroned Kronos and the other Titans and then divided up earth among the three of them. Zeus reinedRead MoreHades, an Influence on Greek Society1029 Words   |  5 PagesGreek gods, the basis of Greek culture and religion, are the center of Greeks’ superstitions and ways to worship. These relate to the god’s origin and their deeds in their myths. Gods can either show jealousy, courage, or kindness to mortals and other gods, so Greeks label the gods based on their qu alities. In most circumstances, the Greeks decide whether to worship or despise a god only by whom or what they rule over. For example, Greeks show reluctance in worshipping Hades, the Lord of the UnderworldRead MoreHades: God of the Underworld779 Words   |  3 PagesGreek mythology Hades is the god of the Underworld. He is part of the first olympians. He was in his father Cronus stomach until Zeus tricked him and freed his brothers and sisters. Once they were free they needed to wage war on Cronus, but they needed the backing and support from some other creatures to help fight the war. So the went to Tartarus the Greek equivalent of hell. When they were the set the Cyclopes free, in return the Zeus, Poseidon, and Hades all got magical items. Hades got a magicalRead MoreEssay about The Afterlife has Fascinated Religion Since the Down of Time1235 Words   |  5 Pageshave a God dedicated to this very belief. Despite the Greeks having many powerful Gods, the God of the underworld and afterlife is the most feared. Not only is Hades the least favored by humans, but by the other Gods as well. He seems to repel others with his dark features before they understand his story, and what he is truly like. This puts him on the stereotypical ‘bad side’ due to his Kingdom and subjects. This comes from all humans natural fear of death, and the unknown. Hades hasRead MoreAncient Greece : An Amazing Place With Culture And A Thriving Population1353 Words   |  6 Pagesthriving population. With all these people someone had to wonder, Where do I go when I die? Myths of great places, terrible monsters and amazing heroes grew out of this question. The people invented the underworld, the place you go when you die. The Greeks also performed rituals on their dead. Some rituals and customs are unorthodox and considered strange in these times. The Greeks thought that at the moment of death, the life force or psyche left the body as a little puff of wind or a lastRead MoreHades and the Underworld1043 Words   |  5 Pagesbelieved in certain Gods and Goddesses and their mythological stories. Among the many gods and goddesses there was Athena, Goddess of wisdom, crafts, and war. Also there was Apollo, God of the sun, music, healing, prophecy, and poetry. Apollo’s twin sister Artemis Goddess of hunting and archery. Then there’s Poseidon, God of the ocean and brother to the most powerful God of them all, the God of all Gods, Zeus. However, there was only one specific God that mortals and even Gods feared, the brotherRead MoreGreek Mythology : Ancient Greece1322 Words   |  6 Pages Greek Mythology is a mystical and unique universe filled with divine beings, semi-gods, oracles, monsters, creatures, heroes, women and powerful gods with the ability to control nature, all intertwined in epic battles controlled by various times on a gigantic stage composed of temples, shines, prophecies, rituals and even a word for the dead which was called the underworld. Greek mythology itself is legend. In fact, it shows a window into the ancient past, a view of a world that existed not onlyRead MoreGreek Mythology : Proper Burial Of A Person869 Words   |  4 Pagesfor the rest of eternity. If the proper burial was given the person was said to then cross over into the underworld where Hades ruled and alongside him was his queen, Persephone. From there the person would be placed in one of the four sections of the underworld: The Asphodel Fields, The Fields of Mourning, Elysium and the Isles of the Blest, or Tartarus. The proper way to prepare the dead involved three parts: the prothesis (laying out of the body), the ekphora (funeral procession), and the intermentRead MoreLife After Death Essay1163 Words   |  5 PagesLife After Death The Romans, Greeks and Egyptians all share many common beliefs such as the belief in the Gods, spirits, souls and ultimately life after death. Although, these cultures share common beliefs, there are still very different ideas and ways in which they related and communicated with the dead. The Egyptians believed the idea of eternal and actual death was incomprehensible. As for the Greeks and Romans, they also share a similar view of what life is like after death, because they